Pull Cord Switch_Run-off Switch_Tear switch-Zhejiang Weikesen Power Technology Co.,Ltd.

Products

Our company is specializing in the production of deviation switch, slip switch, rope switch, chute blocking switch,material flow switch, tearing switch, conveyor belt automation integrated protection devices and control products business.

Cast Iron Tilt Switch

High and low level detector, also known as tilt switch, is a simple structure, easy to use, safe and reliable material flow, material level detector, easy to install, strong and corrosion resistant. Uses: Widely used in chute coal pipe switch clogging detection, round coal bunker height alarm and stacker-reclaimer coal heap detection, tipper unloading probe, etc.

Stainless Steel Tilt Switch

Cast Iron Tilt Switches

Pull cord switch

Pull cord switch is widely used in iron and steel, cement, power plants, mines and other factories with belt conveyor, The product is installed on both sides of the belt conveyor, is a kind of protective switch for emergency shutdown of the belt conveyor, pull the wire rope at any point within the operating distance of the switch, cut off the running circuit to stop the whole line, to achieve the protection of the belt conveyor and personal safety.

KPT1 Two- stage Run- off switch

It is used for the detection of the runout of conveyor tapes to prevent faults such as material overflow due to tape funout. This machine is widely used in the transport systems of mining, power and chemical industries.

Run-off Switch

Automatic Longitudinal Tear Switch

Slit switches provide an alarm signal to the monitor or shut down the conveyor in case of tears, punctures, damaged junctions or sharp objects protruding from the belt. The rip switches are mounted in pairs on both sides of the conveyor belt. They are connected by two sections of wire rope. One end of the wire rope is fixed to the support bracket and the other end is attached to the pull ring of the rip switch. The two sections of wire rope form a monitoring surface under the conveyor belt. When an object or torn belt is suspended down and swept down to the wire rope, the wire rope pulls the tear switch pull ring to make it move and the tear switch sends out an alarm or stop signal.

Speed Spin Detector WKSRD- II

Speed switch combines the advanced technology of Schneider sensor and the actual application of domestic speed sensor developed (also known as speed sensor, low speed switch, speed switch, slipping switch) This product is mainly used for belt conveyor, elevator, screw conveyor, grinder, crusher, pump, centrifugal dry fire machine, mixer and dust collector and other rotating equipment, the belt slipping,belt break, jamming, slow rotation, dynamic shaft shear and overload, drive chain (belt) off and other mechanical failure can be dealt with in a timely manner, to protect the equipment to reduce losses.

Slip switch DH- III

Non- contact Under speed Slip Switches QS

The under-speed slip switch is a highly reliable, simple and versatile monitoring device for shaft speed and other rotating devices. Whenthe current speed signal is monitored to be below the normal speed range the switch outputs a switch signal for alarm or shutdown. No moving parts, no wear and tear, long safety life, integrated structure, centralized control device, easy to set or troubleshoot.

Lifter Run-off switches

When the belt conveyor, zipper machine, scraper machine, hoist and other transmission machinery fail to run off, misalignment, etc., it cansend alarm signals to the microcomputer control system in time or directly stop, effectively protecting equipment and personal safety, avoiding the expansion of accidents, and achieving the purpose of protecting production and equipment. In addition, because the signal can be sent to the microcomputer control system, it is convenient to realize the automatic control of the factory, so it can also achieve the purpose of reducing staff and increasing efficiency, centralized control, and facilitating production and scheduling. Widely used in steel,
electric power, chemical industry, cement, coal, metallurgy, building materials, mining, ports and terminals, grain, warehouses and other types of conveying equipment industry.

Non-contact Speed Detectors

This product is suitable for detecting the slippage between the tape and the main roller in the operation of the belt conveyor to prevent malicious accidents caused by slippage, and is also suitable for interlocking or stopping multiple tape machines.

Contact Speed Detectors

Thin Film Level Meters LFB

LFB type film level meter is widely used in modern industrial production over kind of silo, chute and equipment material level positioning and automatic protection. It is used to monitor and control the level of material and granular materials in containers. It has the advantages of advanced technology, reasonable structure, reliable performance, easy to use and maintain, and high performance to price ratio.

ABOUT WeiKeSen

Zhejiang Weikesen Power Technology Co., Ltd. is a comprehensive manufacturer of power equipment,electrical and electronic products. The company has established scientific research partnerships with universities and research institutes, obta···

1000 w

Registered capital
20 +

Subsidiary company
30 +

Sell at home and abroad
500 +

Cooperative customer

WHY CHOOSE US

Companies adhering to the "excellence in the pursuit of excellence, quality first, customer first purpose," to create"first-class quality, transport safety" to better serve the majority of users.

Price
Especially for middle & low volume orders.
Time
We offer just-in-time delivery helping you avoid costly product
Team
We are trained in latest technology and market trends and we wi
Widespread stock
We have good relationship with the suppliers
Supply
All products are produced by our factory and have sufficient su
Strict quality inspection
Has a full set of product testing equipment. Ensure the quality